Downloads

# Omega Ampworks Granophyre by Neural DSP Changelog

All notable changes to this project will be documented in this file.

## [1.0.0] – February 14th 2020
### Release Version

If you experience any bugs, errors or crashes, please contact our support team at [email protected].

# Archetype: Abasi by Neural DSP Changelog

All notable changes to this project will be documented in this file.

## [1.1.0] – November 30th 2019
### Added
– BUILT-IN TUNER is now available in both versions, plug-in and standalone.

## [1.0.0] – November 25th 2019
### Release Version

If you experience any bugs, errors or crashes, please contact our support team at [email protected].

# Archetype: Nolly by Neural DSP Changelog

All notable changes to this project will be documented in this file.

 

## [1.0.1] – September 11th 2019
### Changed

– The navigation arrows only work while the plugin has output signal FIXED.
– A duplicated track with Archetype Nolly on it, turns muted randomly FIXED.
– The bottom part of AUDIO SETUP menu doesn’t show complete FIXED.
– Fade in while starting to playback or bouncing in Reaper FIXED.
– **Garageband 10.3.2 / If you create an audio session and load Archetype Nolly, the plugin crashes (PENDING)

## [1.0.0] – August 30th 2019
### Release Version

If you experience any bugs, errors or crashes, please contact our support team at [email protected].

# Parallax by Neural DSP Changelog

All notable changes to this project will be documented in this file.

## [1.0.0] – June 28th 2019
### Release Version

If you experience any bugs, errors or crashes, please contact our support team at [email protected].

# Archetype: Plini by Neural DSP Changelog

All notable changes to this project will be documented in this file.

## [1.0.2] – May 6th 2019
### Changed

– Some users were experiencing muted offline bounces in Presonus Studio One 3 . FIXED.
– Audio would be faded in if it was bounced from the very beginning of an audio track containing Archetype: Plini. FIXED.
– Some users were experiencing crashes in Logic X with version 1.0.1 FIXED.

## [1.0.1] – April 26th 2019
### Changed

– Some users were experiencing muted offline bounces in DAWs like PreSonus Studio One 4 and Cubase 10 Pro (MacOS/Windows). FIXED.

## [1.0.0] – April 12th 2019
### Release Version

If you experience any bugs, errors or crashes, please contact our support team at [email protected].

# Fortin NTS Suite by Neural DSP Changelog

All notable changes to this project will be documented in this file.

## [2.0.0] – November 30th 2019 – To ensure a setup without problems, we recommend to make a clean install of this software. Please uninstall the previous version before installing this update.
### Added
– AUTO DEMO was implemented. Trials no longer need an activation code to be activated.
– BUILT-IN TUNER is now available in both versions, plug-in and standalone.
– The standalone version received MIDI SUPPORT. Now you can assign MIDI commands to control plug-in parameters, UI components, and presets files.
### Changed
– STEREO MODE #1: Stereo Switch now pans the microphones internally as dual instance.
– STEREO MODE #2: To ensure retro-compatibility with old audio sessions, we didn’t add volume compensation when you turn on both microphones at the cab section.
– ZUUL algorithm was redesigned to be more accurate to the physical unit.
### Fixed
– Multiple bugs are now fixed to improve stability, graphic performance, and audio issues.
– Black-Screen GUI (FIXED)

## [1.0.0] – December 14th 2018

### Pre-Sale Release Version

If you experience any bugs, errors or crashes, please contact our support team at [email protected].

# Fortin Nameless Suite by Neural DSP Changelog

All notable changes to this project will be documented in this file.

## [3.0.0] – November 29th 2019 – To ensure a setup without problems, we recommend to make a clean install of this software. Please uninstall the previous version before installing this update.
### Added

– AUTO DEMO was implemented. Trials no longer need an activation code to be activated.
– BUILT-IN TUNER is now available in both versions, plug-in and standalone.
– The standalone version received MIDI SUPPORT. Now you can assign MIDI commands to control plug-in parameters, UI components, and presets files.
### Changed
– STEREO MODE #1: Stereo Switch now pans the microphones internally as dual instance.
– STEREO MODE #2: To ensure retro-compatibility with old audio sessions, we didn’t add volume compensation when you turn on both microphones at the cab section.
– ZUUL algorithm was redesigned to be more accurate to the physical unit.
### Fixed
– Multiple bugs are now fixed to improve stability, graphic performance, and audio issues.

## [2.0.0] – March 13th 2019

### Added

– Fortin Zuul Gate Pedal
– Fortin Hexdrive Pedal
– Previous and Next arrows to navigate through Presets.
– Presets are organized by Categories (Factory, Artist, and User). Subfolders can be created under User.
– IR Loader now remembers all the files within the chosen IR folder.
– IR and Microphones are now organized by Categories (Internal Mics, Artist Mics, Custom Mics).
– Previous and Next arrows to navigate through IR files.
– Magnifying glass icon to quick access to the preset folder
– Default Preset now accessible.

### Changed

– MVC behavior corrected. At Maximum volume, it saturates more the power amp section.
– Improvements in Power Amp model and Power Amp Tubes.
– Mic Selection not responding for some users bug. FIXED
– Re-Validation with a second Fortin Amplifier Unit.

## [1.2.0] – October 29th 2018

### Added

– Standalone versions for Windows and Mac OSX.

### Changed

– Artifacts when Gain I and Gain II at high values, FIXED.

## [1.1.3] – September 24th 2018

### Changed

– Fix on version 1.1.2 sounding different and being 4db louder than previous versions. This was an internal mistake. We deeply apologize. Version 1.1.2 only.

– Fix MVC when max generates pops and clicks on version 1.1.2 only.

## [1.1.2] – September 18th 2018

### Changed

– Gate takes the Sidechain from the input and applies gate after the amp section.

‍- Input Gate is now called Gate and automation parameter is called Threshold.

– Gate Release time faster.

– AU Validator was not passing on some tests. FIXED.

– Small improvement in noise.

– Default Settings set to “good to go” settings instead of all controls at noon.

## [1.1.1] – September 11th 2018

### Changed

– Some users were experiencing issues with the plugin not showing up the user interface. FIXED.

## [1.1.0] – September 8th 2018

### Added

– Gate knob. Added Gate in the input signal, after input Gain knob in the audio chain.

## [1.0.0] – September 6th 2018

### Pre-Sale Release Version

 

If you experience any bugs, errors or crashes, please contact our support team at [email protected].

# Darkglass Ultra Plugin by Neural DSP Changelog
All notable changes to this project will be documented in this file.

 

## [3.0.0] – November 29th 2019 – To ensure a setup without problems, we recommend to make a clean install of this software. Please uninstall the previous version before installing this update.
### Added
– AUTO DEMO was implemented. Trials no longer need an activation code to be activated.
– BUILT-IN TUNER is now available in both versions, plug-in and standalone.
– The standalone version received MIDI SUPPORT. Now you can assign MIDI commands to control plug-in parameters, UI components, and presets files.
– CLICKABLE ARROWS were implemented to improve the preset navigation.
### Changed
– This installer moves your old user presets to the current default path location [WIN: C:/ ProgramData / Neural DSP – MAC: MacintoshHD / Library / Audio / Presets / Neural DSP /]
– STEREO MODE #1: Stereo Switch now pans the microphones internally as dual instance.
– STEREO MODE #2: To ensure retro-compatibility with old audio sessions, we didn’t add volume compensation when you turn on both microphones at the cab section.
### Fixed
– Multiple bugs are now fixed to improve stability, graphic performance, and audio issues.

## [2.1.0] – November 5th 2018

### Added
– Standalone mode. Access it from Start Menu or Program Files folder in Windows. In Mac OSX from Applications folder.

### Changed
– Graphic bug while loading the right Sub-kick, FIXED

## [2.0.0] – October 16th 2018

### Added
– Cabinet Emulation Section. 7 Microphones and a Sub Kick impulse responses added created with the Darkglass DG410C Cabinet from Darkglass Electronics. Captured by ML Sound Lab.

### Changed
– Overall UI renewed, matching other products of Neural DSP family.
– Presets created with version 2.0.0 cannot be read by older versions. Presets created with older versions CAN be read by version 2.0.0. Cabsim section will be bypassed

## [1.2.2] – June 11th 2018

### Added
– Stereo switch is greyed out when input signal is mono, which means stereo switch would not have any effect anyways.

### Changed
– Errors of input monitoring in Audio Unit format in Logic fixed. Error was generating oscillation and noise making it unusable.
– Crash of Pro Tools while bypassing the plugin from Pro Tools insert bypass were fixed.

## [1.2.0] – May 5th 2018

### Added
– New B7U Front plate UI retouch, for better knob contrast.
– Internal .XML Preset Functionality.
– Preset Save, Preset Import, Preset Delete Functions.
– Preset Drag and Drop Function.
– Folder for Preset files.
MAC: User/Library/Audio/Presets/Neural DSP/DarkglassUltra
Windows: C:\Users\<USER_NAME>\AppData\Roaming\Neural DSP\Darkglass Ultra\
– Manual Preset management allowed. Delete or add files to Preset Folder.

### Changed
– Link – Unlink EQ feature developed. When EQ Switch is set to Unlink, a second set of EQ parameters will be activated to control Clean EQ. The first set of EQ Parameters will still control Distortion channel EQ. If turned off (Linked) First Set of parameters will control
– B7U/VDU Switch now only changes Distortion type and none other parameters.
– BUG: AAX Being written in VST folder for some Windows users, fixed.
– BUG: B7U/VDU Switch Not recalling distortion type values for some users, fixed.
– Glitches in switches and knobs diminished.
– Automation Values have been named better.
– Automation Values will resemble fixed Switch positions. (Not all fixes are applied for VST2).
– Knobs, Switches and all parameters within the Pedal now show position values.
– Input And Output Knobs now show position Values.

## [Released]

## [1.0.0] – April 11th 2018

– First Released Version. Refer to Manual for further information.

## [Released]

If you experience any bugs, errors or crashes, please contact our support team at [email protected].